|
The
Merihart
dog runs are made up out of separate panels bolted together to form
runs of the size suitable for the type of dog that is to be
contained.
The panels are constructed from strong 25mm square
tube frames with the mesh welded into them. The panels are made from
galvanized steel and mesh with welds zinc treated after completion.
The panels may be made first and galvanized after construction if
desired.
The standard panels are made from welded steel mesh
with 4mm diameter wire in either 50mm or 75mm square apertures.
The standard height made is 1.8mtrs
The standard length is 1.5 mtrs for the 75mm square
mesh size, and 1.2 mtrs for the 50mm mesh.
Panels of the same size can be made with a full
height door taking up half the panel.
The
Merihart
panel system can be used to make a free standing rectangle, with or
without a kennel attached, they can be attached to posts to make a
dog proof fence, they can be attached to a shed to make outdoor runs
or used to divide up a inside space in a shed. When used as a run
they can be on a concrete pad, have a floor of paving slabs, or be
put on a veranda board floor.
Easily erected [three bolts per corner ] these high
quality panels can go with you when you move, be rearranged to give
different configurations as needs change.
|
